Filter
Top Products
CL - clear data function: upon pressing the Action button (6)
(fig. 1) the entire data on all previous measurements will be
erased.
NOTE: After changing a battery the recall stack should be
cleared by exercising the CL mode.
OVER 100 – allows to ignore targets closer than 100m. Useful
when looking through bush.
Please note: this is an optional feature on early designs. Latest
version includes automatic “Last Target” selection that renders
obsolete the requirement for a separate manual mode selection.
c. Reflection
Distance measuring procedure includes instant statistical
processing of the package of single measuring sessions.
Qualitative result of the statistical processing is presented on the
Display as a message TARGET REFLECTION (5).
There are four statistical qualifications of the reflected signal:
• NO TARGET REFLECTION – when a reflected signal
isn’t received. Numerical display shows 4 dashes in the
distance displaying area;
• TARGET REFLECTION LOW – when the number of
steady received reflected signals is just enough to make
acceptable conclusion about the distance;
4. TECHNICAL CHARACTERISTICS
1. Optics
Observation
Magnification, x
Objective Lens, mm
Exit Pupil Diameter, mm
Eye Relief, mm
Field of View
Axial Resolution, ”
Image tilt, maximum
- Horizontal
- Vertical
Type of coating
Interpupillary Distance, mm
Diopter Adjustment range
Reticule
Binocular
7
50
7.1
25
5°
6
60”
30”
Fully multi-coated optics
58-72
±4
Corresponds to laser
direction and approx. size
of the laser on target