Filter
Top Products
BEFORE USE CAREFULLY READ ALL THE INSTRUCTIONS!
FAILURE TO OBEY THE INSTRUCTIONS WILL VOID
THE WARRANTY
!
1. BRIEF DESCRIPTION
LRB 7X50 (SPD) Laser Range Finder Binocular is an
advanced Laser Range Finder system that provides instant
distance measurements consistently and accurately. The
stereoscopic device provides convenient observation with both
eyes. The user can measure the distance to an object without
loosing sight of the target. Therefore, the LRB 7X50 (SPD)
substitutes a need for two separate devices (binocular and range
finder) combining both requirements in a single device.
The outstanding optics provide a sharp, clear image under all
conditions. LRB 7X50 (SPD) is utilizing a revolutionary digital
design, which is outperforming any other product in its class and
price range.
The unit sends invisible, eye safe laser beam pulses to the target.
The returned beams are captured by the digital circuitry. The
time differential allows us to calculate the distance to the target.
7. TROUBLE SHOOTING
The range measuring mode does not work.
Press the Action Button again.
Check that the batteries are installed properly. Check the charge of
the batteries. Replace if they are weak.
How can I clear last reading before making next measurement?
Direct the unit’s LCD reticle at the new target, press the Action
button. The new reading will appear.
There are black dots in the image.
A LCD (Liquid Crystal Display) is installed in the optical channels
of the device. Due to manufacturing imperfections in the
production process of the LCD, small black dots, scratches and
other blemishes might be visible. Those blemishes are strictly
regulated for maximum allowed number, size and location. It does
not degrade the product's performance.
Range measurement cannot be obtained.
• Check if range detection mode is activated (message READY
appears on the LCD display)
• Check if Active Button is pressed
• Make sure that neither your hand nor finger is blocking
objective lenses (Laser emitting lens or Receiver lens).
• Check if the unit is steady while pressing Action button.