New Balance 1600 Treadmill User Manual


 
ENTER
Pressing this confirms the
selection of a program.
Also confirms the speed
and incline values during
the setting of a user
program.
POWER
Pressing this key
brings power to the
Treadmill and must
be pressed before
any other key.
FAN
Turns fan on/off.
Press once - low
again - medium
again - high
again - off
SHOWS TIME
& PACE
SHOWS
SPEED
SHOWS
PULSE &
INCLINE LEVEL
SAFETY KEY
The Computer can be operated
only with the Safety Key attached
to the Treadmill. The Computer
shuts off and the Treadmill stops
when this key is removed.
+ OR - KEYS
Increases or decreases
the INCLINE when
pressed.
START/STOP
Pressing this starts
and stops the
Treadmill Belt.
SELECT
Displays the preset or user programs.
Also will display the elevation and
elevation gain values for three seconds
during workout. When power is off,
press for 2 seconds to change from
miles to kilometers.
Tells level of incline when Select
is pushed during your workout
Shows pulse during
your workout
Shows time during
your workout
Shows minutes per mile
during your workout
Shows speed during
your workout
PROGRAM KEYS
Pressing these selects a program.
Press Power, then select Program,
hit Enter, then Start.
PROGRAM KEYS
Pressing these selects a program.
Press Power, then select Program,
hit Enter, then Start.
Shows
calories
burned
CAL/HR
During your
workout
pressing
Select will
show the
Calories you
could burn
per hour.
SPEED
QUICK KEYS
1-11 MPH
Pressing these
keys slowly
changes the
Incline to that
value.
ELEVATION
GAIN
Shows
elevation
gain during
workout
when Select
is pushed.
INCLINE
QUICK KEYS
1-12%
Pressing these
keys slowly
changes the
Incline to that
value.
+ OR - KEYS
Increases or decreases the
SPEED when pressed.
Pressing once increases or
decreases the speed 0.1
mph. Pressing and holding
for two seconds will
increase or decrease the
speed faster.
17
1800
QUICK GUIDE
Shows
distance