Mobile Authority MBW-100 Watch User Manual


 
3English
Electronic equipment
Most modern electronic equipment is shielded from
RF energy. However, certain electronic equipment
is not, therefore:
Do not use your Bluetooth watch near medical
equipment without requesting permission. If you
are using any personal medical devices, e.g.
a pacemaker or a hearing aid, consult the
manufacturer of that equipment.
Disposal of old electrical &
electronic equipment
This symbol on the product or on its
packaging indicates that this product
shall not be treated as household
waste. Instead it shall be handed over to the
applicable collection point for the recycling of
electrical and electronic equipment. By ensuring
this product is disposed of correctly, you will help
prevent potential negative consequences for the
environment and human health, which could
otherwise be caused by inappropriate waste
handling of this product. The recycling of materials
will help to conserve natural resources. For more
detailed information about recycling of this
product, please contact your local city office,
your household waste disposal service or the
shop where you purchased the product.
Aircraft
Turn your Bluetooth function of the watch
OFF before boarding any aircraft. To prevent
interference with communication systems,
you must not use your Bluetooth function
of the watch while the plane is in the air.
Blasting areas
Turn off all your electronic devices when in a
blasting area or in areas posted turn off two-way
radio to avoid interfering with blasting operations.
Construction crews often use remote control RF
devices to set off explosives.
Potentially explosive atmospheres
Turn off your electronic device when in any area
with a potentially explosive atmosphere. It is rare,
but your electronic device could generate sparks.
Sparks in such areas could cause an explosion
or fire resulting in bodily injury or even death.
Areas with a potentially explosive atmosphere
are often, but not always, clearly marked.
Power supply
Connect the AC power adapter only to designated
power sources as marked on the product.
To reduce risk of damage to the electric cord,
remove it from the outlet by holding onto the
AC adapter rather than the cord.
Make sure the cord is positioned so that it will not
be stepped on, tripped over or otherwise subjected
to damage or stress.
To reduce risk of electric shock, unplug the
unit from any power source before attempting
to clean it.
The AC power adapter must not be used outdoors
or in damp areas.
DANGER – Never alter the AC cord or plug. If the
plug will not fit into the outlet, have a proper outlet
installed by a qualified electrician. Improper
connection can result in risk of electric shock.
This is the Internet version of the User's guide. © Print only for private use.