Filter
Top Products
A
RCTIC
T
HUNDER
5
C
HAPTER
1 O
PERATION
SET-UP
1. Remove all items from shipping containers and set them aside. Remove all packaging material.
Inspect exterior of the main cabinet and seat pedestal for any damage.
2. Remove keys from controller assembly. Unlock and open rear door, coin box and cash box. Electrical
cords, mechanical components, and assorted spare parts are packed inside cash box. Casters and leg
levelers for the cabinet and pedestal are packed inside of a box with the seat pedestal.
3. Locate casters, leg levelers and related mounting hardware.
4. Install one nut onto each leg leveler. Tilt main cabinet as needed to locate threaded holes in underside
of cabinet. Install a leveler and nut into each hole. Do not tighten nuts at this time. Repeat these steps
for seat pedestal as well.
5. Install the provided swivel casters. Install the six (6) swiveling casters on the main cabinet and seat
pedestal as shown in the illustration below.
6. Install provided locking casters. Install the two (2) locking casters on seat pedestal as shown in the
illustration below.
LOCATION OF CASTERS AND LEVELERS
WARNING
Cabinet is top heavy. Do not push against plastic parts during movement.