Filter
Top Products
Before starting your treadmill the following actions will need to be properly completed:
1. Be certain that your treadmill sits stable on the floor. It is also recommended that you locate
your treadmill in a pleasant area that gives you something to look at while working out, such
as a window or television. Maintaining an exercise program with a treadmill located in a
poorly lit basement room is more difficult than when your treadmill is located in an active
and pleasant location.
2. Make sure that your treadmill is plugged into a properly grounded outlet as described in the
grounding section of this document.
3. Turn the On/Off switch, which is located in the front of your treadmill, to the On position.
4. Insert the magnetic safety key in the round area centered at the bottom of your display. If the
safety key is not inserted properly you will see lines across the middle of each LED display.
QuickStart
1. Attach the "Safety Key" to your clothing. This key will immediately shut off your treadmill if
removed and is strongly recommended for your safety.
2. QuickStart - The quickest and easiest way to start your treadmill is to push the QuickStart
button. This will cause the display to count down for 3 seconds and then begin in the
"Manual Program" at .5 Miles Per Hour.
3. Speed - To increase the speed push on the "Fast" button. Each time you depress the "Fast"
button the speed will increase by .1 Miles Per Hour
4. Incline - To increase the "Incline" depress the "Up" arrow. Each time you depress the "Up"
button it will increase the incline by one degree. To reduce the incline, depress the
"Down" button.
5. Display Readouts - Besides "Speed" and "Incline" the center LED window will display Time,
Distance, Calories, Heart Rate and Laps around the track. By pressing the mode button you
can select the function that you want displayed on the center window, or you can go to the
scan mode to scan through all functions. In the "Quick Start" mode, time will start to
count up from 0:00.
13