Filter
Top Products
8
Handlebar Support Post Assembly
1. Remove screw L , washer M and nut N from both right/left sides of base frame.
2. Stand up the support post and handle bar. (FIG-1 )
3. Attach screw L , washer M and nut N back to both right/left sides of base frame
and tighten the screws.
4. Attach right base cover on base frame and tighten by screw R . Repeat the same
step on the left side.
Handlebar Assembly
1. Adjust the handlebars so they are positioned on the handlebar posts. Secure the right/left
handle bar on the support post by tightening the screws O . ( FIG-4 )
2. Rotate the console tube so the console bracket is positioned as shown in Figure 4.