Filter
Top Products
10
H
OW
T
O
S
TABILIZE
T
HE
L
IFE
F
ITNESS
T
READMILL
After placing the unit where it will be used, check its stability. If there is even a slight rocking motion or the unit is
not stable, determine which stabilizing leg is not resting on the floor. To adjust, loosen the JAM NUT (A) and turn
the STABILIZING LEG (B) until the rocking motion ceases and both stabilizing legs rest firmly on the floor.
Retighten the JAM NUT.
NOTE: It is extremely important that the stabilizing leg be correctly adjusted for proper operation. An unbalanced
unit may cause striding belt misalignment.
P
OWER
S
WITCH
Located on the front panel at the base of the treadmill, the ON/OFF switch has two positions - "I" (one) for ON and
"0" (zero) for OFF.
I
MMOBILIZING THE
T
READMILL
The treadmill can be immobilized if necessary as follows: If the MESSAGE CENTER does not display “SELECT A
WORKOUT”, press the STOP key twice until that prompt appears. Then, press and hold down the SPEED DOWN
key and press the STOP key. The MESSAGE CENTER displays “IMMOBILIZED”. The immobilized treadmill
cannot be operated, and it remains in this state across resets, power cycles, etc. The main motor and incline are
disabled. To restore normal operation, repeat the same key sequence: Press and hold down the SPEED DOWN
key, and press the STOP key. The MESSAGE CENTER displays SELECT A WORKOUT, indicating that the
treadmill is ready for use.