Filter
Top Products
2.5 ATTACHING THE
POWER CORD
Insert the female plug of your treadmill’s power cord into the male outlet next to your treadmill’s power switch.
Note: T3 treadmills shipped in the USA and Canada are supplied with a North American line cord. 230V T3 treadmills
shipped outside North America are supplied with three line cords: a UK line cord, a continental line cord, and an
Australian line cord. Attach the cord suited to your area.
2.6 CALIBRATION
Before using your treadmill please follow the calibration instructions below. Please stand to the side of your treadmill
during calibration.
1. Turn treadmill on, or if on press the RESET key.
2. The console will display "PLEASE WAIT" or "WAIT".
3. When "PLEASE WAIT" or "WAIT" disappears and the screen is blank press and hold the PAUSE key until "DIAGNOSTICS"
appears.
4. Use the arrow keys to scroll through the diagnostics menu to "CALIBRATION" or "CALIB".
5. Press enter to select "CALIBRATION" or "CALIB".
6. Press the START key located on the lower control pad to begin calibration.
7. Your treadmill will now automatically cycle through a series of tests including speed and incline adjustments in order to com-
plete calibration.
8. When successfully completed the console will display "PASS"
***If there was an error during calibration the console will display "FAIL".
***If a failure occurred press STOP twice and restart the process at Step 1.
***If failure occurs again take note of the error number display and contact Life Fitness customer support at 1-800-351-3737
(U.S.A. and Canada).
9. Upon successful completion press the RESET key three times to exit calibration mode.
13