Filter
Top Products
Position the console bridge (5) near the top of the uprights.
Attach the wire connectors leading from the left upright and
the console bridge. Be sure the connectors are fully seated
together. Feed any excess wire into the hollow inside the left
upright.
Attach the console bridge to the uprights using six
M8 x 15mm Tapered Bolts (9), three for each upright. Leave
the bolts finger-tight at this time.
CAUTION: Do not pinch the wire when attaching the left
upright to the console bridge.
Attach one handlebar extension (7) on each side of the
console bridge, using two black M8 x 15mm (8) Bolts and
two Star Washers (3) on each side.
11
3
9
9