Filter
Top Products
SM80 Unpacking & Assembly Instructions
10
6. Bolt the floating pulleys into the 190 lb weight stacks used for the crossovers
using a 7/8” combination wrench. You will need to remove the pulley from the housing
to thread the plug into the weight stack bayonet. Make sure the 9/16” jam nut is
threaded 1-5/8” away from the pulley as shown in Figure 12. Leave the pulleys out
since you will need to have them out when the cable is routed.
Figure 12. Bolt the floating pulleys into the crossover 190 lb weight stacks.
7. Mount the seated row and lat benches to the frame. Using the bolts specified in
Figure 14 and a 9/16” socket and combination wrenches, mount the benches as
shown in Figures 13 and 14.