Filter
Top Products
SIX PRE-SET WORKOUTS
AROUND THE WORLD, CASCADES, FOOTHILLS, INTERVAL, KILIMANJARO, and SPEED TRAINING are variations
of the HILL workout. These workouts cannot be changed “on the fly.”
AROUND THE WORLD is an interval-training workout in which the hills resemble scenes of various geographical areas.
CASCADES is a two-peak workout in which intensity levels gradually increase and decrease.
FOOTHILLS is a rolling hill workout with low intensity levels.
INTERVAL is a HILL workout in which intensity levels rise and fall. The higher levels gradually incline toward a peak and
then gradually decline.
KILIMANJARO is a HILL workout in which the intensity levels gradually incline toward one ultimate peak and then grad-
ually decline.
SPEED TRAINING is a HILL workout in which the intensity level alternates between high and low levels very quickly to
simulate a typical speed training workout.
CROSS-TRAIN AEROBICS
During this workout, the MESSAGE CENTER displays prompts to emphasize different muscle groups. To emphasize
upper-body muscles, the MESSAGE CENTER displays prompts to focus on pushing and pulling the moving arms at vari-
ous times. To emphasize lower-body muscles, the MESSAGE CENTER displays prompts to rest the hands on the station-
ary handlebar, thus forcing the legs to do all the work. The program also alternates between forward and reverse motion
as well as different speeds.
Ten seconds after prompting the user to change pedaling direction, the workout applies “braking resistance,” that is, a
high resistance level that essentially forces the user to stop pedaling. Once the user stops pedaling, the workout resumes
the normal resistance level. The actual level of braking resistance depends on the user’s pedaling speed. If the user is
pedaling at a rate equal to, or faster than 6.2 mph (10.0 kph), the workout applies the maximum level of braking resist-
ance. If the user is pedaling at a speed below 6.2 mph (10.0 kph), the workout applies 92% of the maximum.
CROSS-TRAIN AEROBICS is a constant-resistance workout. However, for a similar experience with a variable-resis-
tance-level workout, the user can start any workout (except for FAT BURN and CARDIO) and then press the AEROBICS
MODE key.
CROSS-TRAIN REVERSE
This workout features alternating periods of pedaling forward and pedaling backwards. If the user chooses a workout du-
ration 14 minutes or above, the unit displays alternating prompts to pedal forward for five minutes and then backward for
two minutes. If the user selects a goal of 13 minutes or below, the display prompts the user to pedal forward for two min-
utes and then backward for one minute. If the user selects a goal other than time (distance or calorie), the program uses
the default setting of prompting forward motion for five minutes and reverse for two minutes.
This feature varies the emphasis on different leg muscles. Ten seconds after prompting the user to change pedaling direc-
tion, the workout applies “braking resistance,” that is, a high resistance level that essentially forces the user to stop pedal-
ing. Once the user stops pedaling, the workout resumes the normal resistance level. The actual level of braking resistance
depends on the user’s pedaling SPEED. If the user is pedaling at a rate equal to, or faster than, 6.2 mph (10.0 kph), the
workout applies the maximum level of braking resistance. If the user is pedaling at a speed below 6.2 mph (10.0 kph), the
workout applies 92% of the maximum.
CROSS-TRAIN REVERSE is a constant-resistance workout. However, for a similar experience with a variable-resistance-
level workout, the user can start any workout (except for FAT BURN and CARDIO) and then press the REVERSE MODE
key.
26