Filter
Top Products
18
3.3 CALIBRATION
Before using your treadmill please follow the calibration instructions below. Please stand to the side of your treadmill
during calibration.
1. Turn treadmill on, or if on press the RESET key.
2. The console will display “PLEASE WAIT” or “WAIT”.
3. When “PLEASE WAIT” or “WAIT” disappears and the screen is blank press and hold the PAUSE key until
“DIAGNOSTICS” appears. Once ”DIAGNOSTICS” appears, press ENTER.
4. Use the arrow keys to scroll through the diagnostics menu to “CALIBRATION” or “CALIB”.
5. Press enter to select “CALIBRATION” or “CALIB”.
6. Press the START key located on the activity zone to begin calibration.
7. Your treadmill will now automatically cycle through a series of tests including speed and incline adjustments in
order to complete calibration.
8. When successfully completed the console will display “PASS”.
***If there was an error during calibration the console will display “FAIL”.
***If a failure occurred press STOP twice and restart the process at Step 1.
***If failure occurs again take note of the error number display and contact Life Fitness Customer Support
Services at 1-800-351-3737 (U.S.A. and Canada).
9. Upon successful completion press the RESET key three times to exit calibration mode.