Filter
Top Products
15
4
12
K
3
5
10
D
5
11
9
L
20
K
7. Locate the one of the UPRIGHT HANDRAILS (#12). Carefully
insert the top of the UPRIGHT HANDRAIL into the user right end
of the HANDLEBAR ASSEMBLY (#15). Align the mounting holes.
Secure the UPRIGHT HANDRAIL to the HANDLEBAR
ASSEMBLY using two MOUNTING SCREWS (#4). Position the
bottom of the UPRIGHT HANDRAIL over the mounting hole in the
top of the right FRAME LEG (K). Using one HEX HEAD BOLT
(#?), mount the UPRIGHT HANDRAIL to the right FRAME LEG as
shown. Tighten the BOLT securely. Repeat the procedure for the
remaining UPRIGHT HANDRAIL (#12) on the left side of the
HANDLEBAR ASSEMBLY and FRAME.
8. Lift the MONOCOLUMN SHROUD (A) and tighten the
MONOCOLUMN BOLTS (#1) securely.
9. (Model 9500HR, 9100) Using four MOUNTING SCREWS (#5),
attach the ACCESSORY TRAY (#11) to the DISPLAY CONSOLE
(#9) as shown.
10. Attach all CABLES (L) leading from the DISPLAY CONSOLE
MOUNTING BRACKET (D) ACCESS HOLE to the back of the
DISPLAY CONSOLE (#9).
11. Feed any excess cable into the MONOCOLUMN (#10). Using four
MOUNTING SCREWS (#5), secure the DISPLAY CONSOLE
(#9?) to the DISPLAY CONSOLE MOUNTING BRACKET (D).
CAUTION: DO NOT OVER-TIGHTEN THE PHILLIPS HEAD PAN
SCREWS (#5).
CAUTION: BE CAREFUL NOT TO PINCH THE WIRE HARNESS
(E) WHEN ASSEMBLING THE
CONSOLE ASSEMBLY (#9) TO THE
DISPLAY CONSOLE MOUNTING BRACKET (D).
MISE EN GARDE : NE SERREZ PAS TROP LES VIS
CRUCIFORMES À TÊTE CYLINDRIQUE (Nº 5).
MISE EN GARDE : VEILLEZ À NE PAS PINCER LE FAISCEAU
DE CÂBLES (E) LORS DU MONTAGE DE LA CONSOLE (Nº 9)
SUR SON SUPPORT (D).
12. Secure the MONOCOLUMN SHROUD (A) to the MAIN SHROUD
using four MOUNTING SCREWS (#7).
CAUTION: DO NOT OVER-TIGHTEN THE PHILLIPS HEAD PAN
SCREWS (#7).
MISE EN GARDE : NE SERREZ PAS TROP LES VIS
CRUCIFORMES À TÊTE CYLINDRIQUE (Nº 7).
13. Insert the FRAME CAPS (#20) into the ends of the FRAME LEGS
(K).