Life Fitness 95T Treadmill User Manual


 
13
2 SERVICE AND TECHNICAL DATA
2.1 PREVENTIVE MAINTENANCE TIPS
The Life Fitness Treadmill is backed by the engineering excellence and reliability of Life Fitness and is one of the most
rugged and trouble-free pieces of exercise equipment on the market today. Commercial Life Fitness Treadmills are
among the most popular of aerobic trainers, regularly standing up to marathon use - 18 hours a day, seven days a week
- in health clubs, colleges and military facilities the world over.
NOTE: Safety of the equipment can be maintained only if the equipment is examined regularly for damage or wear.
Keep the equipment out of use until defective parts are repaired or replaced. Pay special attention to parts that are sub-
ject to wear, as outlined below.
REMARQUE : pour conserver un matériel sûr, il convient de l'inspecter régulièrement afin de déceler tout signe d'usure
ou d'endommagement. N'utilisez pas l'appareil tant que les pièces défectueuses n'ont pas été réparées ou remplacées.
Portez une attention toute particulière aux pièces qui s'usent, comme indiqué ci-dessous.
The following preventive maintenance tips will keep the Life Fitness Treadmill operating at peak performance:
Clean the display console and all exterior surfaces regularly with mild soap and water or a mild household clean-
er. Use only a soft cotton cloth. Apply cleaner to the cotton cloth and before cleaning.
DO NOT use ammonia or acid based cleaners. DO NOT use abrasive cleaners. DO NOT use paper towels, DO
NOT apply cleaners directly to equipment surfaces.*
Check operation of the emergency stop system once a week.
Check the operation of the stop button and stop magnet once a week.
Inspect and vacuum the area directly surrounding and under the unit regularly.
Vacuum around the striding belt regularly to keep debris from accumulating.
Inspect exterior parts regularly for wear, particularly the striding belt, deck and line cord.
Check to make sure the unit is properly leveled.
Check the position (centering) of the striding belt.
The optimum operating position of the striding belt is from 0.75 inches (19.05 mm) to 1.25 inches (31.75 mm) from either
side of the frame. If the striding belt travels beyond this position, see Section 2.5, titled How to Adjust and Tension the
Striding Belt, or contact Life Fitness Customer Support Services, for proper alignment instructions, 1-800-351-3737
(USA).
*NOTE: When cleaning the exterior of the unit, a non-abrasive cleaner and soft cotton cloth are strongly recommended. At no
time should cleaner be applied directly to any part of the equipment; use non-abrasive cleaner on a soft cloth and then wipe
the unit. Contact Life Fitness Customer Support Services for more details (See Section 2.7 titled, How to Obtain Product
Service).