Filter
Top Products
3.8 ASSEMBLE FRONT BASE SHROUD; CONSOLE BRACKET TO THE UPRIGHT
Parts: Hardware Bag #5 (8, M5 X 12mm Black Phillips Head Screws)
(2, M10 X 15mm Silver Hex Head Bolts)
Tools: Phillips Screwdriver, 17mm Socket Wrench
Position the left side base shroud (W) over the metal bracket (X) and screw in with four M5 X 12mm Black Phillips Head
Screws (Y). Repeat for the right side base shroud.
Slide the console bracket (Z) into the upright. Use two M10 X 15mm Silver Hex Head Bolts (A1) to attach the console
bracket to the upright.
Note: Avoid pinching the console wires.
Y
X
Y
W
Z
A1
12