Filter
Top Products
3 ASSEMBLY
3.1 TOOLS & HARDWARE
Identify the following components after unpacking your cross-trainer:
WAVE WASHER (QTY.2)
FLAT WASHER 10mm ID (QTY. 2)
LARGE FLAT WASHER (QTY. 2)
M10 X 74MM BLACK HEX HEAD BOLT
(QTY. 2)
M10 X 20MM CLEAR ZINC HEX HEAD BOLT (QTY. 3)
M10 X 15MM SILVER HEX HEAD BOLT
(QTY. 4)
M10 X 70MM SILVER HEX HEAD BOLT
(QTY. 3)
M10 HEX NUT (QTY. 2)
M5 X 12MM BLACK
PHILLIPS HEAD SCREW (QTY. 4)
PLASTIC END CAP (QTY. 2)
M5 X 12MM CLEAR ZINC
PHILLIPS HEAD SCREW (QTY. 8)
M3.5 X 8MM BLACK ZINC
PHILLIPS HEAD SCREW (QTY. 6)
M5 X 8MM BLACK
PHILLIPS HEAD SCREW (QTY. 4)
10 706020 8030 9040 100 12050 110 130 140 150 160
8
Tools Needed for Assembly:
• Phillips Head Screwdriver
• 17mm Socket Wrench
• 17mm Open End Wrench