Filter
Top Products
STEP 11:
FIGURE 11
• Place TOWER BRACE (7) over the GUIDE RODS (15) as shown and SECURELY assemble
TOWER BRACE (7) to the TOWER (6) using two 1/2 X 4” BOLTS (18), two 1/2” WASHERS (24),
and two 1/2” LOCK NUTS (26) as shown in FIGURE 11.
10
0
1
2
3 4 5
6
1/2 1/2 1/2 1/2 1/2 1/2
• LOOSELY assemble two 2 X 7-1/4” PLATES (8) to
two 4-1/2” PULLEYS (13) using two 3/8 X 2-1/4”
BOLTS (21), four 3/8” WASHERS (25), and two 3/8”
LOCK NUTS (27). See FIGURE 12.
STEP 12:
27
3/8 X 2-1/4” 21
FIGURE 12
13
8
25
18 1/2 X 4”
7
24
26
6
15
31
• Slide the 13/16” SHAFT COLLARS (31) to the top of the GUIDE RODS (15) and SECURELY tighten
the SHAFT COLLAR (31) set screws. See FIGURE 11.