Filter
Top Products
FIGURE 8
STEP 8
~3/8 X2"
Loop CABLE (13) around one 3-1/2" PULLEY (4) in the PULLEY BRACKET (2) and SECURELY assemble using one 318 X 2"
BOLT (10), and two 3/8" WASHERS (8) and one 3/8" LOCK NLrI" (9) as shown in FIGURE
FIGURE 9
STEP 9
¯
Remove one existing 3-1/2" PULLEY, two WASHERS,
two 2" WHEELS and two SPACERS from the
ADJUSTMENT TUBE on the 832 LEG PRESS OPTION
by unfastening the 3/8 X 4-1/2" BOLT holding the
pulley on. See FIGURE 9. (NOTE: The pulley will be
used in STEP 12.)
2" WHEEL
3/8 X 4-1/2"
BOLT