Filter
Top Products
- 1 -
BICYCLE HANGER
KH 4056
Safety information
• Read the operating instructions carefully before
using the appliance for the first time and
preserve this book-let for later reference.
Pass the manual on to whomsoever might
acquire the appliance at a later date.
• Never lift more than 20 kg with the bicycle
hoist. This would damage the bicycle hoist
and cause the load to crash down.
• Check for the correct tightness of all screws
before using the bicycle hoist.
• At all times use the wall bracket for securing
the load. Otherwise, the load could crash
down.
• Do not take up a position underneath the
hanging load.
• Use the bicycle hoist for storage only, not for
any other purpose.
• Do not carry out repairs on the suspended
load.
• Should the nylon cord be damaged, exchange
it as soon as possible. It could tear.
Attention Ensure that the nylon cord does not
slide too fast between your hands! It could lead
to burns and abrasions!
Attention The bicycle hoist may not be opera-
ted by weak people, for example children. The
bicycle could crash down and cause injuries.
Attention! Ensure that the double retaining
hooks cannot slip from the saddle and
handlebars of the bicycle when it is being
raised and lowered.
Intended use
The bicycle hoist is intended to save space and
relieve the tyres during bicycle storage. It is not
meant to be used for commercial purposes.
Delivery Contents
2 Ceiling brackets
2 Double retaining hooks
1 Nylon cord
1 Wall bracket for the nylon cord
10 Cross-head screws with plugs
Description of the appliance
1
Ceiling bracket
2
Nylon cord
3
Safety mechanism
4
Double retaining hooks
5
Cross-head screws
6
Plugs
7
Wall bracket
Required assembly tools:
1 Cross-head screwdriver
1 Measuring tape
1 Drill
1 Drill bit (8 mm diameter)
IB_KH4056_GB_LB4 30.11.2007 12:26 Uhr Seite 1