Filter
Top Products
Speed Run Program (T260 only)
The Speed Run like the Hill Climb controls a certain parameter. Speed Run is speed changes. Selecting a higher level will
default a higher speed profile. Elevation changes are user controlled.
The speed will change as you progress into the program. Changing the speed or elevation manually will cause the rest of
the program to change.
To select the Speed Run program:
1. Press the DECREASE key to select Speed RUN. Press the JustGo
®
/ENTER key to accept the Speed Run program.
2. Select your weight. Press the speed INCREASE or DECREASE keys to select the appropriate weight. The weight will vary
from 50 to 400 pounds (23 to 182 kilograms). Press the JustGo
®
/ENTER key to accept.
3. Select the exercise duration. Press the speed INCREASE or DECREASE keys to select the appropriate exercise duration. Press
the JustGo
®
/ENTER key to accept.
4. Select the exercise level by pressing the speed INCREASE or DECREASE keys. The higher the level, the greater the speed
will be during the program. The speed changes that are made during each level are shown on Figure 17. Press the
JustGo
®
/ENTER key to accept and start the exercise.
Level Speed (mph) Speed (km/h)
1 1 to 4 1.6 to 6.4
2 1 to 5 1.6 to 8.1
3 2 to 6 3.2 to 9.7
4 3 to 7 4.8 to 11.3
5 4 to 8 6.4 to 12.9
Track Program (T260 only)
The Track program is one that enables you to choose from
1-99 laps of a 400 Meter (or about a 1/4 mile) Olympic track.
Each Track program allows the user to completely control their
speed from the start of the exercise until the end since there is
no automatic speed control during the Track program.
The Track program will display an oval track screen that will
show your progression on the track. The central information
window will show you how many laps have been done in your
workout. Elevation although not usually found on any track
can be used on the T240–T260.
To select the Track program :
1. Press the DECREASE key to select TRACK. Press the JustGo
®
/ ENTER key to accept the Track program.
2. Select your weight. Press the speed INCREASE or DECREASE keys to select the appropriate weight. The weight will
vary from 50 to 400 pounds (23 to 182 kilograms). Press the JustGo
®
/ ENTER key to accept.
3. Select the number of laps. Press the speed INCREASE or DECREASE keys to select the appropriate number of laps.
Press the JustGo
®
/ ENTER key to accept.
4. To commence the exercise, press the JustGo
®
/ENTER key. A three second countdown will appear on the screen before
the running belt starts moving. Remember, that at the start of this exercise, the speed will always start at 0.5 mph
(0.8 km/h). You must press the Speed INCREASE or DECREASE keys if you wish to change the speed during the exercise.
17
PAUSE
figure 8