Filter
Top Products
5
NOTE: Hand tighten bolts and nylon nuts until machine is fully assembled.
Connect the Uprights (#2) & (#12) to the Cross Bar (#01) using
four Hex bolts M10X75 (#33) and eight D10 washers (#35), two
Reinforcement (#17) and four M10 aircraft Nut (#36).
Insert the Crutch (#3) into the Uprights (#2)&(#12) through rect.
Outer plug (#16), secure with two Knob Bolts (#15).
Attach Safety Hook (#25) to Crutch (#3) using Aircraft Nut (#28).
Place Backrest Adj. Bar (#4) Between Uprights (#2 ) and (#12).
STEP 1
Assembly