Filter
Top Products
7
Assembly
NOTE: Hand tighten bolts and nylon nuts until machine is fully assembled.
Attach Seats (2) to the two Seat
Supports (15) using four Washers
(B2) and four Bolts (A5). Align
the holes in the Seat Support (15)
with the holes in the bracket that
is welded to the main frame.
Slide Seat Supports onto Main
Frame.
Attach one Backrest Support (8)
to the pivot rod welded to the
Main Frame. Push two Bushings
(24) into the BackRest Support.
Lift up the Backrest Support (8) to
align the holes with the Backrest
Adjust Bar (7). Attach with one
Bolt (A2), two Washers (B1) and
one Aircraft Nut (C1). Repeat for
other side.