Filter
Top Products
Error Messages
23
Treadmill Error Messages
Your treadmill is equipped with a software package that enables error messages to be dis-
played when there is a problem. The following error codes will be displayed in the console dis-
play windows.
Safety Interlock Error Messages
SI 1 - Safety key missing, replace and try again.
SI 2 - Over voltage protection trip. Notify Keys Fitness Customer Service.
Other Error Messages
E11 - Lack of speed feedback data from belt motor. Attempt calibration. See Calibration
Sequence section on page 20 of this Owners Manual for detailed information.
E22 - Under Speed condition detected from the belt motor. Attempt calibration. See Calibration
Sequence section for detailed information.
E33 - Over Speed condition detected from the belt motor. Attempt calibration. See Calibration
Sequence section for detailed information.
E44 - Stuck key detected at power up, Notify Keys Fitness Customer Service.
To avoid possible damage to the treadmill and the possibility of injury, do not operate
the treadmill until the problem is corrected. Call Keys Customer Service at 888-340-
0482.