Filter
Top Products
Assembly
3. Attach the console harness together from inside the left upright and base assembly as shown in Figure 3.
Next, attach left upright and right upright to base using allen bolts M8x15 (Qty. 8) and washer 9x22x2 mm
(Qty. 8). Do not tighten bolts.
Figure 3
LEFT
LEFT FENDER
_RIGHT UPRIGHT
WASHER
,22X2
p_
q\
CONSC \_'ALLENBOLT
HARNESS MS=ls
4. Attach the console assembly by connecting the console harness, incline harness, EKG harness, and speed
harness as shown in Figure 4.
Next, attach the console assembly to the left and right uprights using philip screw M6x12 (Qty. 4).
Figure 4
CONSOLE-.
CONSOLE
HARNESS
;REW
LEFT UPRIGHT "j
RIGHT UPRIGHT _'j