Filter
Top Products
Assembly
7
Figure 4: Top Rail Assembly
4. Attach the top rail to the left and right uprights
using 2 Allen Bolts M5*15 and 2 Arc Washers.
You may now firmly tighten all hardware. Refer to
Figure 4.
Note: Be careful not to pinch the wire harness.
5. Remove the four M5*20mm screws from the back
of the console. Set aside.
Connect Console Wire Harness being careful not to
pinch the wires.
Using four screws previously removed from console,
attach console to the Top Rail. Refer to Figure 5.
CONSOLE
Figure 5: Console Wire Connections
CONGRATULATIONS!!!!!!!!
You have completed assembly of your HealthTrainer 402t Treadmill.