Filter
Top Products
8 9
6. First connect the Pulse Wires (26) to the T-Shaped Handlebar
(10). Then connect the T-Shaped Handlebar (10) to the Main
Upright (2) with Screws (55), Flat Washers (50) and Locknuts
(49).
6
5. Feed the two Pulse Wires (26) from the Console (5)
down into the Main Upright (2) and out the handlebar
hole. Connect the Controller Wire (28) to the Console (5).
Then connect the Monitor (5) to the Main Upright (2)
with Screws (59).
5