Filter
Top Products
Monitoring Your Heart Rate
To obtain the greatest cardiovascular benefits from your exercise
workout, it is important to work within your target heart rate
zone. The American Heart Association (AHA) defines this target
as 60%-75% percent of your maximum heart rate.
Your maximum heart rate may be roughly calculated by subtract-
ing your age from 220. Your maximum heart rate and aerobic
capacity naturally decreases as you age. This may vary from one
person to another, but use this number to find your approximate
effective target zone. For example, the maximum heart rate for an
average 40 year-old is 180 bpm. The target heart rate zone is
60%-75% of 180 or 108-135 bpm. See Fitness Safety on page 20.
Before beginning your workout, check your normal resting heart
rate. Place your fingers lightly against your neck, or against your
wrist over the main artery. After finding your pulse, count the
number of beats in 10 seconds. Multiply the number of beats by
six to determine your pulse rate per minute. We recommend tak-
ing your heart rate at these times; at rest, after warming up, dur-
ing your workout and two minutes into your cool down, to accu-
rately track your progress as it relates to better fitness.
During your first several months of exercising, the AHA recom-
mends aiming for the lower part of the target heart rate zone-
60%, then gradually progressing up to 75%.
According to the AHA, exercising above 75% of your maximum
heart rate may be too strenuous unless you are in top physical
condition. Exercising below 60% of your maximum will result in
minimal cardiovascular conditioning.
18 19
1. Step 1-4 is similar to B, but “FITNESS TEST” program also requires age
and sex of user.
5. Press ENTER key, (W2) displays “ENTER AGE” and (W1) displays
preset age of last operation.
6. Set age of the exerciser by keys.
7. Press ENTER key, (W2) displays “SET SEX,”
8. Choose “MALE” or “FEMALE” by keys, (W1) displays MALE
or FEMALE correspondingly.
9. Press ENTER key, (W2) displays “PRESS ENTER TO BEGIN”
10. Press ENTER key and start to exercise.
E. START MODE
1. Each column of (W2) represents one minute of operation when time is
being counted up.
2. In (W2) presetting time value divided by 16 is equal to each column
when operation time is being counted down.
3. Press ENTER key to change the “SCAN” function in operation and the
corresponding indication of “SCAN” will turn on or off.
4. The exerciser can adjust workout level by using keys in operation
except during “FITNESS TEST” program.
F. RESULT MODE
1. When operation time is finished, the console is in
“Result state”, (W1) displays the following data in
4 second intervals.
a. Total operation time.
b. Cumulative calories.
c. Cumulative distance.
d. Average speed.
e. Average RPM.
2. W3 displays “average heart rate”
3. W2 displays “RESULTS MODE” and shows profiles
of every program for 2.5 seconds sequentially, except in
“FITNESS TEST” program.
4. W2 displays “SCORE=000” when “FITNESS TEST”
Program is completed.
+
-
+
-
+
-