Filter
Top Products
3a
3a. Mount Foot Pedals (14) to Pedal Arm (10) with Screws (15),
Washers (16) and Nylon locknut (17).
4. Connect the Monitor Cable (51) in the Handlebar Post (38) to
the Monitor Cable (50) in the Main Frame (1). Slide the
Tension Cord (53) up into the Handlebar Post (38). Connect
the Handlebar Post (38) to the Main Frame (1) using Screws
(52) and Washers (27)
3
4
8 9
3. Slide the Bolts (12, 13) through the hole of the Foot Pedal
Mount Tubes (10) and screw into the Crank (7). Must screw
on counter clockwise. Secure both Bolts (12, 13) with Nuts
(6a, 6b). Do not forget to place the Plastic Spacer (9) in
first.(See 3a above).