Filter
Top Products
3. Attach pedals (30, 31). Axles of pedals are branded “L” and
“R.” The pedal marked “R” goes on the right hand side of the
bike and the one marked “L” on the left hand side. Tighten
the left pedal by turning counter-clockwise and the right pedal
by turning clockwise.
4. Slide the console tube (2) through the console tube collar (14).
Connect the computer cable in the console tube (2) to the
computer cable in the main frame. Connect the tension cable
in the console tube to the tension cable connection in the main
frame. Attach the console tube (2) to the frame (1) with the
locknuts (49), flat washers (50) and screws (56) provided.
Attach the console tube collar (14) to the main frame (1) with
screws (57).
6 7
3
4