Filter
Top Products
4 5
Assembly of Alliance
900 Recumbent Bike
REMOVE ALL SECURITY TAPE AND WRAPPING
BEFORE BEGINNING.
2b. First remove the support tube (24), from the main frame (1).
Slide the assembled seat carriage onto the carriage tube (16).
Re-assemble the support tube (24). Attach the end cap (17)
with screws (57) and rear carriage tube rubber stopers (66)
with bolts (74, 75) and washer (76).
2a. Attach the rear handlebar (22) to
the seat carriage (3) with the flat
washers (50) and screws (79) pro-
vided. Connect the seat cushions
(9,10) to the seat carriage (3) with
the washers (78) and screws (80).
1
2b
2a
1. Attach foot tubes (4) to the frame by using the carriage bolts
(44), flat washers (50) and cap nuts ( 45) provided. Make sure
the foot tube with wheels is assembled onto the front of the
unit.