Filter
Top Products
Assembly
5
INSTRUCTIONS FOR ASSEMBLY:
Unpack the box in a clear area. Check to make sure all components are present and in good condition.
Do not dispose of the packing material until the assembly is completed. Tools have been provided for you
to use when assembling this product.
Locate the hardware pack and identify the following parts required for assembly.
Tools:
1. Allen Wrench
2. Phillips Screw Driver
3. Wrench
Main Components:
1. Owner’s Manual
2. Main Frame
3. Handlebars Left and Right
4. Console Tube w/ Upper Electronic Wire
5. Pulse Handlebar w/ Pulse Wires
6. Rear Stabilizer
7. Front Stabilizer
8. Water Bottle
9. Pedals Left and Right
10. Console
11. Pedal Joint Covers A and B
12. Decoration Covers A and B
Hardware:
1. Screw (C4 & D7) - Qty. 4
2. Nut Cap (C7 & D10) - Qty. 4
3. Spring Washer (C6 & D9) - Qty. 4
4. Flat Washer (C5 & D8) - Qty. 4
5. Screw (E2) - Qty. 4 (Located in back of Console)
6. Flat Washer (B13) - Qty. 6
7. Spring Washer (B14) - Qty. 6
8. Screw (B21) - Qty. 6
9. Screw (G4) - Qty. 4
10. Bolt (J1) - Qty. 2
11. Screw (J3) - Qty. 4
12. Bolt (B7) - Qty. 2 (Located on Console Tube)
13. Screw (F3) - Qty. 1 (Located in Pulse Handlebar)
14. Bolt (J4) - Qty. 4
15. Flat Washer (J5) - Qty. 4
16. Spring Washer (J6) - Qty. 4
17. Knob (J7) - Qty. 4
18. Screw (J2) - Qty. 4