Filter
Top Products
Assembly
Assembly requires the included allen wrench and your own phillips screwdriver.
Do not plug in the power cord until all assembly step are completed.
1. With the treadmill deck in the down position, leave the unit on the original packing material to assemble all
parts.Refer to figure 1.
2. Connect the Console Harness together. The harness is located in the Left Upright assembly. Refer to Figure
2 and Figure 3.
Caution: Make sure harness in installed inside upright and pay attention not to pinch the wire harness.
6
Figure 1: Deck in down position
Figure 2: Console Harness Location Figure 3: Console Harness Connection
CONSOLE
HARNESS