Filter
Top Products
Owner’s Manual
33
STEP 3 Assemble Console
1. Insert console cable/cables #14 and #18 through the
holes on the console base before setting the console
on the base.
2 Secure and tighten console in place with
two screws #7, M8x30mm and two flat washers #1.
3. Connect console cable #14 to upright cable #13
from the bottom.
4. Also connect contact HR cables #18 to #19 together
from the bottom.
5. For model TX3 only: Connect extension key
cables #16 to #17 and #17 to #15 together on both sides
of the console from the bottom.