Filter
Top Products
4
■ Please bear in mind that there is always a danger of children injuring themselves whilst using
swings, climbing frames,
toy vehicles or similar equipment.
■ When using the toy vehicle, the user should always wear strong shoes.
■ Instruct your child how to use the vehicle correctly and draw attention to possible sources of danger.
■ When children are at play, situations may arise which cannot be predicted by the manufacturer and
for which he cannot be held responsible.
■ Although dangerous situations are unlikely to occur if the toy is used correctly, children at play should,
if possible, be supervised.
■ Before use, always check all screws and plug-in connections as well as respective safety devices fit
correctly.
■ Never use corrosive or abrasive substances to clean the toy. Never use substances which may cause
pollution of the environment.
■ Due to the nature of materials used in pneumatic tyres on KETTLER toys, it is not recommended for the
product to be left in any one place for too long where solvents or other chemicals, i. e. petrol, may lie.
This may result in a chemical reaction, which could cause the tyres to mark the surface such as a vinyl
flooring. If in doubt put something underneath the wheels to cover the floor.
■ Lubricate the bearing sleeves of the wheels and the handlebars with a few drops of oil every two or
three months.
Assembly of the toy vehicle
■ The toy vehicle must be assembled carefully by an adult person. Study the assembly instructions care-
fully before beginning work. Assemble the vehicle in the exact sequence shown by the letters in the
diagrams. This is essential for the safe function and use of the scooter
■ Please note that there is always a danger of injury when working with tools or doing manual work.
Therefore please be careful when assembling this machine.
■ Ensure that your working area is free of possible sources of danger, for example don’t leave any tools
lying around. Always dispose packaging material in such a way that it may not cause any danger.
There is always a risk of suffocation if children play with plastic bags!
■ Bolt all the parts together loosely at first, and check that they have been assembled correctly. Tighten
the locknuts by hand until resistance is felt, then use spanner to finally tighten nuts com-
pletely against resistance (locking device). Then check that all screw connections have been
tightened firmly. Attention: once locknuts have been unscrewed they no longer function correctly (the
locking device is destroyed), and must be replaced.
■
Please keep original packaging of this article, so that it may be used for transport at a later
date, if necessary.
■ For technical reasons, we reserve the right to carry out preliminary assembly work (e.g. addition of
tubing plugs).
■ When ordering spare parts, always state the full article number, spare-partnumber, the quantity required
and the inspection number stamped on the back.
Example order: Art. no. 08848-000 / spare-part no. 12802003 / 1 piece / inspection no. ...
Important: spare part prices do not include fastening material; if fastening material (bolts, nuts, washers etc.)
is required, this schould be clearly stated on the order by adding the words „with fastening material“.
KETTLER (GB) Ltd. · KETTLER House, Merse Road · North Moons Moat · Redditch, Worcestershire ·
B 98 9 HL · Great Britain
KETTLER International Inc. · P.B. 2747 · Virginia Beach · VA 23450-2747 USA
http://www.kettler.net