Kettler 08848-000 Bicycle User Manual


 
3
GB
Assembly Instructions
Read these instructions carefully before assembling the product or using it for the first time. They contain
important information for your safety and for the correct use and maintenance of this KETTLER product.
Keep the instructions in a safe place for information or for ordering spare parts.
Beachten Sie, dass bei jeder Benutzung von Werkzeug und bei handwerklichen Tätigkeiten immer
eine mögliche Verletzungsgefahr besteht. Gehen Sie daher sorgfältig und umsichtig bei der Montage
des Gerätes vor!
Sorgen Sie für eine gefahrenfreie Arbeitsumgebung, lassen Sie z. B. kein Werkzeug umherliegen.
Deponieren Sie z. B. Verpackungsmaterial so, dass keine Gefahren davon ausgehen können. Bei
Folien/Kunststofftüten für Kinder Erstickungsgefahr!
Bitte verschrauben Sie zunächst alle Teile lose und kontrollieren Sie deren richtigen Sitz. Drehen Sie die
selbstsichernden Muttern bis zum spürbaren Widerstand zuerst mit der Hand auf, anschließend ziehen
Sie sie gegen den Widerstand (Klemmsicherung) mit einem Schraubenschlüssel richtig
fest. Kontrollieren Sie alle Schraubverbindungen nach dem Montageschritt auf festen Sitz. Achtung:
wieder gelöste Sicherheitsmuttern werden unbrauchbar (Zerstörung der Klemmsicherung) und
sind durch Neue zu ersetzen.
Bewahren Sie die Originalverpackung des Gerätes gut auf, damit sie später u. U. als Transportverpackung
verwendet werden kann.
Aus fertigungstechnischen Gründen behalten wir uns die Vormontage von Bauteilen (z.B. Rohrstopfen) vor
.
HEINZ KETTLER GmbH & Co. KG · Postfach 1020 · D- 59463 Ense-Parsit
KETTLER Austria GmbH · Elsenwang 119 · A - 5322 Hof / Sbg.
Trisport AG · Im Hösch · CH-6331 Hünenberg
http://www.kettler.net
This KETTLER product has been designed in accordance with the latest standards of safety and subjected
to constant quality monitoring. The data gained from this quality process is then incorporated in the deve-
lopment of our products. For this reason, we reserve the right to make changes in design and technolo-
gy in order to offer our customers products of the highest standard of quality at all times. In spite of this,
should you have any ground for complaint, please contact your KETTLER dealer.
For your safety
This toy vehicle should be used for its intended purpose only, i.e. one (1) person only. It should not be
used in any other way, as this may be dangerous. The manufacturer cannot be held liable for dama-
ge or injury caused by incorrect use.
This product is a toy and is not suitable for use in traffic or on public roads.
Damaged components may endanger the safety of the user or shorten the lifespan of the product.
Inspect it at regular intervals to ensure that none of the components are damaged and that none of the
bolts or other joints have worked loose.
Replace worn or damaged parts immediatlely and ensure that the product is not used again until this
has been done. If any parts require replacement, use only original spares manufactured by KETTLER.
The product complies fully with the appropriate safety regulations (European Standard EN 71, CE) and
has been passed for use by TÜV-GS. Incorrect repairs or alterations (removal of original parts or addi-
tion of other parts etc.) may be a source of danger to the user.
Use of the Toy
Ensure that the toy vehicle is not used until it has been properly assembled and checked by an adult
person.
For safety reasons, it should never be used close to slopes, busy roads, railway crossings, rivers, ponds
etc.