Filter
Top Products
Important Information
www.ironmanfitness.com
8
Assembly
3
ALLEN BOLTS M8X50
ALLEN BOLTS
M8X15
WASHERS Ø8
CENTER
CROSSBAR
LEFT SIDE
RIGHT SIDE
ALLEN WRENCH
ASSEMBLY FOR UPRIGHTS
Step 1:
While standing on the treadmill, hold onto
the center cross bar and lift it upwards in
the direction indicated by the image.
Step 2:
Align holes on the left upright and secure
the upright with 2 allen bolts M8x15, 2
allen bolts M8x50 and 4 washers Ø8.
Step 3:
Align holes on the right upright and secure
the upright with 2 allen bolts M8x15, 2 allen
bolts M8x50 and 4 washers Ø8.
NOTE: Hand-tighten all bolts until the
bolts on both sides are installed.