Filter
Top Products
Note: Do not tighten Screws until
you have fully completed Figure 2.
6
Getting Started - The Ironman Fitness CDT Elliptical will require some assembly. Unpack the
box in a clear area. Remove packing material. Do not dispose of packing material until assem-
bly is complete and unit is working properly. Place the unit on a clean level surface for assem-
bly. Make sure there is easy access to an electrical outlet. Before assembling, the unit should
be placed as close as possible to its final location. Locate all hardware bags, Labeled Figure
1 through Figure 9, with the exception of Figure 8. If you are missing any bags, please call
Ironman Fitness at 1-800-750-4766. Tools have been provided for use while assembling this
product.
Assembly
Figure 1
Locate bag labeled Figure 1. Locate
Console Tube. Attach Console Tube to
Main Frame. Slide Tube down into Main
Frame. Connect Upper Console Wire
to Lead Wire Assembly. Secure using
three M10*80 mm Hex Head Screws
extending through the frame and
Console Tube, three 10x20 Washers and
three Crown Nuts, M10*1.5. Use three
M10*120 Hex Screw to secure through
the Front of the Console Tube and Main
Frame.
Note: Ensure that all wires are secure
inside console. Be careful not to pinch
wires.
Figure 1
M10*80 HEX SCREW
CROWN NUT, M10*1.5
M10*120 HEX SCREW
UPPER CONSOLE WIRE
LEAD WIRE ASSEMBLY
CONSOLE TUBE