Filter
Top Products
7
Assembly
CONGRATULATIONS!
You have completed assembly of your Aeros Elliptical.
Figure 5
Figure 6
CONSOLE
MAIN WIRE HARNESS
650MM
PEDAL
LEFT PEDAL
TUBE
M6X1.0-18 SCREW
Figure 5
Step 1:
Locate Console and remove
the Four Screws that are already
installed on the back.
Step 2:
Connect the Main Wire Harness
and Pulse Wires coming from
the Console Tube to the Wires
coming from the Console.
Step 3:
Secure Console to Console Tube
using the Four Screws that were
removed in Step 1.
Figure 6
Step 1:
Attach Pedal to Left Pedal Tube
using Four M6x1.0-18 Screws.
Repeat for Right Side.