Filter
Top Products
6
Assembly
M8 SPRING WASHER
Figure 3
Figure 4
MAIN WIRE HARNESS
900MM
CONSOLE TUBE
MAIN WIRE HARNESS
650MM
CONSOLE TUBE COVER
CONSOLE TUBE COVER
M5X0.8-12MM SCREW
Figure 4
Step 1:
Slide the Console Tube
Cover down until it is resting
on the Main Frame. Secure the
Console Tube Cover to the Main
Frame using Four M5x0.8-12mm
Screws.
Figure 3
Step 1:
Locate Console Tube and
Console Tube Cover. With the
Bottle Holder of the Console Tube
Cover facing you, insert Console
Tube into the Console Tube Cover.
Step 2:
Connect the Main Wire Harness
from the Console Tube to the Main
Wire Harness coming from the
Main Frame.
Step 3:
Secure Console Tube to the Main
Frame using One M8x1.25-95
Screw and One 8x16-3.5 Washer.
Note: Steps 1 - 3 must be
completed before moving on to
Step 4.
Step 4:
Install Four M8x1.25-55 Screws
and Four M8 Spring Washers
through the side of the Console
Tube. Note: Be careful not to
pinch Main Wire Harness when
installing Console Tube.
M8X1.25-95 SCREW
M8X1.25-55 SCREW
8x16-3.5 WASHER
Note:
Must Be
installed
rst. See
Step 3 for
details.