Filter
Top Products
Figure 9
Figure 8
10
Assembly
CONGRATULATIONS!
You have completed assembly of your Achiever Elliptical.
M6*10 HEX SOCKET BOLT
PULSE HANDLEBAR ASSY
PULSE WIRE
Figure 9
Locate bag labeled Figure 9. Connect
the Pulse Wires coming from the Pulse
Handlebar Assy to the Pulse Wires from the
Console. Secure Pulse Handlebar Assembly
to Console Tube using six M6*10 Hex
Socket Head Bolts.
Note: Ensure that all wires are secure
inside console tube. Be careful not to pinch
wires.
Figure 8
Locate Console. Carefully feed Pulse Wires
from the Console down the Console tube.
Connect Upper Console Wire to the appro-
priate location on the back of the Console.
Secure Console to Console Tube using four
Screws.
Note: The four Console Screws will already
be installed into the back of Console when
you remove it from the box.