Filter
Top Products
9
Assembly
Figure 12
Step 1:
Attach the left pedal (30) to the left
crank. The left pedal is marked with
an "L". Turn the threads on the pedal
counter-clockwise to secure it to the
crank.
Step 2:
Attach the right pedal (31) to the right
crank. The right pedal is marked with
an "R". Turn the threads on the pedal
clockwise to secure it to the crank.
Step 3:
Attach the pedal straps (30A and 31A)
to the appropriate pedal. Each strap is
marked with an "L" or an "R". The side
with 2 holes will go on the clip towards
the inside of the unit.
Figure 13
Step 1:
Attach the front handlebar (10) to the
console tube (2) using hex head screws
(55) and washers (49).
Figure 11
Step 1:
Reattach the carriage tube caps (13 & 14)
using screws (70).