Filter
Top Products
10
Assembly
Figure 15
Step 1:
Connect the wires coming from the con-
sole (15) to pulse wires (66) and wire
harness (58).
Step 2:
Secure the console (15) to the console
tube (2) using screws (39).
Note: The screws are already pre-
installed into the back of the console.
Figure 14
Step 1:
Connect pulse wire (57) and wire har-
ness (38) coming from the main frame
to pulse wire (66) and wire harness (58)
from the console tube.
Step 2:
Slide the console tube (2) onto main
frame (1) and secure using hex head
screws (55) and curved washers (56).
Congratulations!
You have completed assembly of your new 235r bike!