Filter
Top Products
Assembly
8
FIGURE 6:
Step 1:
Slide Left Handlebar (3) onto the
Stud. Connect Left Handlebar (3)
with one M10x19x2.0mm Washer
(69), M10x30 Black Washer (61),
Shaft Cap (12), M10 Locknut (52),
Acorn Cap Nuts (13), and M10
Curved Washer (87).
Step 2:
Repeat for right side.
Figure 6
FIGURE 5
Step 1:
Pull the Pulse Wires (25a) out
through the top of the of the
Console Tube (2). Connect the
Pulse Wires (25a) and Extension
Wire (7) to the wires coming from
the Console. Using Four M5x10mm
Screws (8) attach the Console (55)
to the Console Tube (2) Note: The
four Screws will already be installed
into the back of Console (55) when
you remove it from the box.
Figure 5