Filter
Top Products
FIGURE 1
Step 1:
Using Two Carriage Bolts (46),
Cap Nuts (49), Hex Head
Screws (63) and Four Washers
(50), attach the Left and Right
Extrusions to Main Frame.
Step 2:
Attach Aluminum Extrusion
Plate (15) to the Left and Right
Extrusions using Four M8x95mm
Hex Head Screws (80), M8x19mm
Washers (50), and 8mm Locknuts
(49).
Assembly
6
Figure 1
FIGURE 2
Step 1:
Using Three M6x45mm Screws
(86) and M6x16mm Washers (85)
attach Left Foot Pedal (16) to the
Left Pedal Tube Assembly (31).
Repeat for right side.
Figure 2