Filter
Top Products
5
Part No. 1078996 Rev. B INVACARE 8000 PRESSURE MATTRESS
STANDARD DEFLATION
1. Remove therapy pad. Refer to
INSTALLING/REMOVING
THERAPY PAD in this instruction sheet.
2. Disconnect the two (2) power unit air
hose quick disconnects from the two (2)
mattress air hose quick disconnects as
shown in DETAIL A.
3. Fold the mattress in half to force the air out.
4. Before re-inflation is possible, connect
the two (2) power unit air hose quick
disconnects to the two (2) mattress air
hose quick disconnects.
5. Inflate the mattress. Refer to
INFLATING THE MATTRESS in
this instruction sheet.
RAPID (CPR) DEFLATION
1. Pull the two (2) CPR straps labeled
PULL CPR away from mattress.
NOTE: Using the PULL CPR straps will disconnect
the CPR plugs from the manifold, which allows the
two (2) chambers to deflate.
2. Before re-inflation is possible, install the
CPR plugs on the CPR straps into the
fittings on the manifold.
3. Inflate the mattress. Refer to
INFLATING THE MATTRESS in
this instruction sheet.
FIGURE 5 - PLACING PATIENT ON MATTRESS
AND ADJUSTING FIRMNESS
DEFLATING MATTRESS (FIGURE 6)
NOTE: Alternating cushions are connected together to form a chamber. The mattress consists of
two (2) chambers.
FIGURE 6 - DEFLATING MATTRESS
Power Unit
Power Switch
Knob
+MAX Setting
-MIN
Setting
CPR
Straps
CPR Plugs
Power Unit Air Hose
Quick Disconnect
Power Unit
Mattress Air
Hose Quick
Disconnect
Manifold
DETAIL A