Filter
Top Products
STEP 6 Extend and secure the tow bar
6A
6B
6C 6D
Bracket
6A. Lay the trailer on its side with the tow bar at the top and undo the lock pin from the bracket.
6B. Pivot the tow bar all the way forward until the shaft comes to rest in the front part of the bracket.
6C. Insert the lock pin shaft all the way through the forward holes in the bracket and tow bar.
6D. Hook the loop over the end of the shaft and make sure the pin is secure.
STEP 7 Attach the wheels to the quick-release brackets and make sure they are secure
7A
7B
7C
7A. Locate the rear wheel brackets on each side of the trailer and read the warnings carefully.
7B. Push one wheel axle completely through the bracket hole until you hear the axle click into place.
7C. IMPORTANT! Pull firmly on each wheel to ensure the lock mechanisms are securely engaged!
STEP 8 How to remove the rear wheels for transport or storage
8A
8B
8C
Release leve
r
8A. The release levers are located between the wheel bracket plates below the frame near the rear
of the trailer. There is one lever on each bracket. They can be accessed from the rear.
8B. Release the axle by pulling the release lever straight out and holding it in place.
8C. Slide the wheel out of the bracket, then let go of the lever. Repeat for the other wheel.
5