Filter
Top Products
STEP 2 (See Diagram 2)
A.) Plug a Front Leg End Cap (#20) onto the bottom of Front Leg (#5). Attach the Front
Leg to the Main Seat Support (#3). Secure it with three M8 x 5/8” Allen Bolts (#31) and
Ø 5/8” Washers (#36). DO NOT tighten the Bolts yet.
B.) Attach the Main Seat Support to the Cross Brace (#4). Attach the Main Seat Stabilizer
(#9) to the Main Seat Support. Align the holes. Secure the Main Seat Support, Main
Stabilizer, and Cross Brace together with two M10 x 2 ½” Carriage Bolts (#30), Ø ¾”
Washers (#35), and M10 Aircraft Nuts (#40). DO NOT tighten the Bolts yet.
C.) Attach the other end of Main Seat Stabilizer (#9) to the Front Leg (#5). Secure it with
one M8 x 5/8” Allen Bolt (#31) and Ø 5/8” Washer (#36).
D.) Securely tighten all Nuts and Bolts previously installed.
6