Filter
Top Products
STEP 3 (See Diagram 3)
A.) Attach the Backrest Incline Support (#10) in between the two side-holes on the
Backrest Supports (#12). Attach the Backrest Supports to the pivot on the Main Seat
Support (#3). Secure it with one M12 x 6 ¾” Hex Bolt (#40), two ∅ 1” Washers (#41),
and one M12 Aircraft Nut (#44).
B.) Place the other end of Backrest Supports rest against the Backrest Adjustment Bar.
C.) Place the Backrest Board (#17) onto the Backrest Supports (#12). Secure it with four
M8 x 1 5/8” Allen Bolts (#38) and Ø 5/8” Washers (#43).
D.) Place the Seat (#18) onto the Main Seat Support. Secure it with four M8 x 1 5/8” Allen
Bolts (#38) and ∅ 5/8” Washers (#43).
DIAGRAM 3
7