Filter
Top Products
STEP 2 (See Diagram 2)
A.) Attach the Main Seat Support (#3) to the Leg Developer Holder (#9). Secure it with two
M10 x 2 3/8” Carriage Bolts (#35), one 2 ¾” x 3” Bent Bracket (#15), two Ø ¾” Washers
(#42), and two M10 Aircraft Nuts (#45) vertically. Secure it with one M10 x 4” Carriage
Bolt (#34), ∅ ¾” Washer (#42), and M10 Aircraft Nut (#45) horizontally.
B.) Attach the Main Seat Support (#3) to the Cross Brace (#4). Secure it with four M10 x 2
3/8” Carriage Bolts (#35), one 5 ½” x 3” Bracket (#14), four ∅ ¾” Washers (#42), and
four M10 Aircraft Nuts (#45).
DIAGRAM 2
6